(Guest)

core drill bit | size | Wholesale Prices | page 9

Fast Delivery. Quaility Diamonds.
  • Posted 2020-05-08

    core drilling in asheville north carolina Picture 1 services 12 inch

    core drilling in asheville north carolina

    Asheville North Carolina is where we core drill nearly 2734 core drill holes in concrete walls and floors for the past 12 years. As one of the one only core drilling companies that will service asheville we are proud to do so. These are some 12 inch core drill holes we made for a dumpster enclosure in Asheville....
  • Posted 2020-05-07

    six inch core drill hole in brick wall Picture 1 services 6 inch

    six inch core drill hole in brick wall

    This is a 6 inch hole in a brick wall we core drilled while doing a project for a plumber on 5th street, charlotte nc. When core drilling brick we often use redhead brand sleeve anchors for mounting the rig to the wall so to keep everything balanced and level while core drilling. It also helps to let the core drill motor operate without s...
  • Posted 2020-05-05

    2 inch hole in wall with rig Picture 1 services 2 inch

    2 inch hole in wall with rig

    This is our very useful small core drill rig core drilling a 2 inch hole into a concrete tilt wall at about 7 foot off the ground. The job was in Fort Mill, SC. A small town south of Charlotte, NC. This is our very simple way of getting the core drilling rig to where the core drill hole needs to be placed on the concrete wall. Not everybo...
  • Posted 2020-05-05

    core drilling 12 inch holes for bollards Picture 1 services 12 inch

    core drilling 12 inch holes for bollards

    here in this picture we core drilled 12 inch holes for bollards for the r and L trucking company in China Grove, North Carolina. Most of the time core drilling a 12 inch hole in a floor is not overly difficult. But at this core drilling project there just happened to be an unlying concrete footer that had a bunch of rebar embedded in it....
  • Posted 2020-04-24

    core drilling 2 inch holes for electric panel Picture 1 services 2 inch

    core drilling 2 inch holes for electric panel

    This is an artsy picture of some 2 inch core drill hole on a wall where the contractor wanted the holes to be lined up vertically up the wall. It was quite a chore the get the exact pattern to set and reset the core drill rig each time....
  • Posted 2020-04-24

    core drilling a 4 inch core drill hole for a pool Picture 1 services 4 inch

    core drilling a 4 inch core drill hole for a pool

    4 inch core drilling pictures and videos. A concrete pools core drilled holes in a perfect 74" center to center pattern before the fencing is installed in Apex, North Carolina. ...
  sizes | | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10