Fast Delivery. Quaility Diamonds.
-
services 3 inch
Richmond Virginia core drilling
Spreading our wings and expanding our core drilling service to Richmond, Virginia.This is a small commercial core drilling job we took on that happened to be located on Fitzhugh St. The task to drill three 3-inch holes in a pre-cast floor from the 3rd floor to the 2nd, and then from the 2nd to the parking garage below. Not too hard of a ...
-
services 1 inch
core drilling 1 inch holes for anchor rods
Core drilling in Harrells, South CarolinaOn a perfect sunny day in late Feb 2021, we set about core drilling 1-inch holes for anchor rods for some new very large transformers that were to be installed at the Baytree Solar farm in Harrells, NC. Normally core drilling a 1-inch hole in a 5-foot concrete pad is not a problem but for this proj...
-
products 6 inch
Core drill 6-inch hole in hollow cement wall
Price $220
Core drilling The Beer Lab in Mooresville, NCHanging off the wall just in a precariously dangerous place is our rig as we complete a Core drill 6-inch hole in the hollow cement wall that we are attached to. This particular project was for a local micro-brewery with a very cool name as you can see in the picture. GhostFace Brewing is brew...
-
services 8 inch
core drilling in concrete walls in south carolina
Another project where we performed some core drilling in concrete walls in South Carolina. This is an eight-inch core drill hole that was cored in a drain basin that connected to the main sewage lines for the city of Fort Mill, SC. Not a very spectacular hole as core drill holes go. I took about 40 minutes total time to finish this job an...
-
services 6 inch
six inch coring in reinforced concrete commercial walls
Sometimes when core drilling you run against a fairly tough concrete wall. This wall had 1 1/2" steel reinforcing rebar every 13-inches embedded into the concrete. Right in the location that the plumbers need a six-inch core drill hole through the wall was 2 of the rebars had somehow gotten entangled inside the wall. Added to the pressu...
-
products 5 inch
5 inch core drill hole in top of septic tanks
Price $476
The 24-inch holes you see here for the new sams express car wash on Providence Rd, Waxhaw, NC needed some more core drill holes in them because they did not come from the concrete fabrication plant as needed. Often we perform core drilling services for plumbers who need more holes in the concrete slug boxes or water basins than the engine...