Fast Delivery. Quaility Diamonds.

services BLOG
core drilling at an angle
These are some beautiful pictures of Boone, NC where we core drilled a hole through a patio wall. We used a smart level to get the angle of the holes to be drilled and wood wedges under the base at the back to raise the core drilling rig to 5 degrees or so. The object of completion was to let rainwater off the patio and over the hill when...
services BLOG
methods to sharpening a core drill bit
What makes a core drill bit dull? If you found this post then you have a problem. Your core drill bit is dull. I am specifically speaking about wet-cutting with diamond embedded teeth core drill bits. The type used on core drill motors that are in general are 120 volts, 15 to 20 amp, and made to drill holes in reinforced concrete walls, f...
services BLOG
hole in a brick wall
Price - $375
This is outside a substation near stanley county, North Carolina, where we are core drilling a 4 inch core drill hole with one of our own core drill bits and it went perfectly. The rig had to mounted upside down to be able to get center of where the penetration of the 13 inch reinforced brick wall need to be for the grey electric pipes to...
services 1 inch
money back guarantee
Price - $1
100% money back guarantee if our core drill bits do not perform after the you drilled the first hole. We often get 40 core drilled holes per bit. We use plenty of water to make sure the bit doesn't get hot, but too much water will keep your core drill bits too cool to cause grit and the bit might not self sharpen....