Core Drilling hole price list
Core Drilling Company North Carolina
704-245-0119
Core Drilling Costs Calculator
Core Drilling service with reasonable prices.
Per hole each prices: Hole Size (Dia.) of one single core drill hole at a wall/floor thickness of 6-inches (Depth).
$200 Minimum. plus the Per Hole charge. IE: $200.00 is per job, not per hole.
An example is: 3 (4-inch) holes in a sidewalk. $200 + $330 ($110.00 ea) equals $530.00 for the total cost of the core drilling project
ALL: prices based on completely core drilling through an 6" thick, wide or deep concrete wall or floor.
NOTE: Walls hole prices based on holes lower than 5 feet high on wall.
NOTE: Wall and Floor hole prices based on Ground Level, and our work truck close for power and water
Carolina Precision Core Drilling.
Precision Core Drill Of Charlotte
704-245-0119
Areas Served :
North Carolina
Charlotte Raleigh Greensboro Fayetteville Durham Chapel Hill Dunn Mooresville Mint Hill Laurinburg Lumberton Winston Salem Sanford Garner Apex Salisbury
| Hole Size (Dia) x 6" Depth | Floors (Vertical) | Walls (Horizontal) |
|---|---|---|
| 1" | $50.00 ea. | $75.00 ea. |
| 1 1/4" | $50.00 ea. | $75.00 ea. |
| 1 1/2" | $55.00 ea. | $70.00 ea. |
| 2" | $70.00 ea. | $90.00 ea. |
| 2 1/2" | $65.00 ea. | $80.00 ea. |
| 3" | $80.00 ea. | $100.00 ea. |
| 3 1/2" | $80.00 ea. | $95.00 ea. |
| 4" | $110.00 ea. | $140.00 ea. |
| 4 1/2" | $120.00 ea. | $145.00 ea. |
| 5" | $125.00 ea. | $150.00 ea. |
| 6" | $150.00 ea. | $200.00 ea. |
| 7" | $175.00 ea. | $225.00 ea. |
| 8" | $200.00 ea. | $300.00 ea. |
| 9" | $250.00 ea. | $340.00 ea. |
| 10" | $300.00 ea. | $400.00 ea. |
| 12" | $400.00 ea. | $500.00 ea. |
| 14" | $600.00 ea. | $650.00 ea. |
Conditions that may increase core drilling prices
- IF Ground penertrating radar is needed to locate post tension cables, embeddeds, data lines, electric lines, phone lines, etc...
- If extensive clean up for core drilling is neccessary
- If an extra helping hand is neccessary to complete the core drilling
- Catching core drill slurry
- Multi-Story Buildings with office space below
- Heavy rebar or other tough to drill material
- High heights requiring a harness, ladder or scaffold
- Underground (ex: manholes) ie Manholes
- In crawl spaces (ex: under houses)
- Up, and Up many Stairs
- Down, and Up many Stairs
- ROOFS
- tough jobs that require extra help
- Truck More than 100 ft away from the core drilling location
Terms defined by This Page
Hole Size - The diameter of the core drill bit.
EX: A 12" bit drills a 12" hole.
EX: A 1" bit drills a 1" hole.
Floors - Vertical core drilling. Downward direction.
EX: Sidewalks, Patios, floors.
EX: Roads, steps, ramps.
Walls - Horizontal core drilling. Sideways direction.
EX: Foundations, walls, manholes.
EX: The side of a building or anything else.
services Core Drilling Hole Prices carolina precision core drill
Carolina Precision Core drilling. Precision Core Drill of Charlotte We offer core drilling services in North Carolina. We can core drill in charlotte, raleigh, greensboro, fayetteville, winston salem, chapel hill and durham. We core drill holes in concrete from 1 inch to 14 inches in walls, concrete floors, cement block walls, brick walls...
services Core Drilling Hole Prices