Core Drill Bit

(Guest)

  • Calculator
  • size
  • affiliate
  • core drilling
Fast Delivery. Quaility Diamonds.

Posted 2021-03-01

Richmond Virginia core drilling Picture 1

Richmond Virginia core drilling


Core drilling services

3 inch

Richmond Virginia core drilling

- $250 Spreading our wings and expanding our core drilling service to Richmond, Virginia. This is a small commercial core drilling job we took on that happened to be located on Fitzhugh St. The task to drill three 3-inch holes in a pre-cast floor ...

Posted 2021-02-25

core drilling 1 inch holes for anchor rods Picture 1

core drilling 1 inch holes for anchor rods


Core drilling services

1 inch

core drilling 1 inch holes for anchor rods

- $140 On a perfect sunny day in late Feb 2021, we set about core drilling 1 inch holes for anchor rods for some new very large transformers that were to be installed at the Baytree Solar farm in Harrells, NC. Normally core drilling a 1-inch hole ...

Posted 2021-02-15

Core drill 6-inch hole in hollow cement wall Picture 1

Core drill 6-inch hole in hollow cement wall


Core drilling products

6 inch

Core drill 6-inch hole in hollow cement wall

- $220 Hanging off the wall just in a precariously dangerous place is our rig as we complete a Core drill 6-inch hole in the hollow cement wall that we are attached to. This particular project was for a local micro-brewery with a very cool name a...

Posted 2021-02-05

core drilling in concrete walls in south carolina Picture 1

core drilling in concrete walls in south carolina


Core drilling services

8 inch

core drilling in concrete walls in south carolina

- $386 Another project where we performed some core drilling in concrete walls in South Carolina. This is an eight-inch core drill hole that was cored in a drain basin that connected to the main sewage lines for the city of Fort Mill, SC. Not a ve...

Posted 2021-01-17

six inch coring in reinforced concrete commercial walls Picture 1

six inch coring in reinforced concrete commercial walls


Core drilling services

6 inch

six inch coring in reinforced concrete commercial walls

- $550 Sometimes when core drilling you run against a fairly tough concrete wall. This wall had 1 1/2" steel reinforcing rebar every 13-inches embedded into the concrete. Right in the location that the plumbers need a six-inch core drill hole thro...

Posted 2021-01-10

5 inch core drill hole in top of septic tanks Picture 1

5 inch core drill hole in top of septic tanks


Core drilling products

5 inch

5 inch core drill hole in top of septic tanks

- $476 The 24 inch holes you seee here for the new sams express car wash on Providence Rd, Waxhaw, NC needed some more core drill holes in them because they did not come from the concrete fabrication plant as needed. Often we perform core drilling...
 
| | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11
Total Posts: 72 | Views:31271 | Home RSS

Advertise on our pages!

core-drill-bit-logo

Menu:

  • Sitemap
  • Privacy Policy
  • FAQ
  • LOGIN
  • SIGNUP

Core-drill-bit.com