Fast Delivery. Quaility Diamonds.
-
services 10 inch
water basin core drilling
this is a basic set up for drilling 10 inch holes in a water basin such as you find for modern sports fields here in North Carolina. The 10 inch diamond embedded core drill bit has a drilling depth of 14 to 14 and a half inches and most water basins are less than eight inches so it easily penetrates the reinforced concrete. After setup it...
-
services BLOG
3 inch core drilling concrete floors
One of the tougher jobs when core drilling is going through metal framing for sheetrock in when it is part of the project. Usually 3 inch core drilling through metal framing is different for if you do not have the core drill rig anchored or vacuum sealed to hold the rig to the floor then your going to have problems cause the core drill bi...
-
services BLOG
core drilling 3 inch hole in concrete block wall
this is how we core drill a 3 inch hole in a block wall for new plumbing in a parking garage in Raleigh, NC. The 3 inch hole was cored at 8 foot off the ground in a partially concrete poured wall that was hollow block cells where we had to anchor the core drilling rig. Most of the time the core drilling goes fairly well as we have did thi...
-
services 12 inch
core drilling in asheville north carolina
Asheville North Carolina is where we core drill nearly 2734 core drill holes in concrete walls and floors for the past 12 years. As one of the one only core drilling companies that will service asheville we are proud to do so. These are some 12 inch core drill holes we made for a dumpster enclosure in Asheville....
-
services 6 inch
six inch core drill hole in brick wall
This is a 6 inch hole in a brick wall we core drilled while doing a project for a plumber on 5th street, charlotte nc. When core drilling brick we often use redhead brand sleeve anchors for mounting the rig to the wall so to keep everything balanced and level while core drilling. It also helps to let the core drill motor operate without s...
-
services BLOG
core drill 5 inch hole in wall
this is us (Carolina Precision Core Drilling Inc), your friendly area core drilling company, using our very trusty core drill rig to put a 5 inch hole in the concrete wall at a rooms to go in Dunn, NC. Again core drilling for very high concrete walls is not the easiest thing to do. Our experience of putting holes through concrete is what...